How to Take a Photo

Before you start:

  • Make sure there is good lighting to showcase your material
  • Move any other materials that are not on offer out of the way, so its not mixed in with the load so you capture your material in one area as a whole stock
  • Make sure all bales are side facing to show all the layers of the bales
  • Do not capture any of your company signage or other companies in the photos
  • You can crop if required to cut out the ground, sky or any un-necessary areas, this feature is available when you upload materials

Photo format:

  • The stock image, take a photo from the side of the whole available load of bales
  • Take a photo of around 4 bales from the left of the load, ensuring bales are side on
  • Take another photo of around 4 bales from the right of the load, again making sure they are side on
  • Take photos of 2-3 bales from various areas
  • Take individual photos of bales
  • Any contamination in the bales would also be useful to photograph

Note: all photos of bales should be from the side to show the layers of materials